|
|
|
|
|
|
|
|
|
|
|
|
|
LED RGB Matrix Screen Driver Board for Arduino ATmega 328 ISP
|
|
| Model No.︰ | - |
| Brand Name︰ | - |
| Country of Origin︰ | - |
| Unit Price︰ | - |
| Minimum Order︰ | 10 pc |
|
|
|
|
|
|
|
6Bit color supported;
Support hardware16MHZ PWM
Without any additional circuitry
Dedicated GPIO and ADC Interface
Support hardware URAT and IIC Communication
24 Channel constant current channel current up to each channel100mA
8 channel constant current source drive current up to each channel500mA
Power supply: +5 VTo+5.3 V.
Operating Current: 300mA.
Operating temperature range:-10°C ~ +50°C
Description:
Full-color RGB Dot matrix driver board is a Arduino Dashboard module which specialized designed for RGBA full-color dot matrix, This module not only can drive the RGB Dot matrix independently but also can be used as aArduino Control panel. It is Very convenient and practical, on-board chip is ATmega 328Chips, the board also raise above ISP Interface, you can programmer bootloader to 328 Chip free. Drawback unlike other Arduino Uno, there is no corresponding leads I / 0 Out of the mouth, but leads to a number of IIC Interface and power supply interface.
Specifications:
Support for multiple cascaded without hardware settings.
Support RGB Three kinds of mixed color display and monochrome display.
Lattice sequence using planar Cartesian coordinate system, to facilitate understanding .
Support arduino Development board powered or external independent power supply.
When multiple cascading is used, if the color is too dark, the supply voltage can be increased to 5.2v or so. Do not exceed 5.4V.
Multiple cascaded, all connected to the data line1Chant board. (Origin(0,0) Where the sub-board for1No sub-board ) |
|
|
|
| Payment Terms︰ | Paypal / Escrow / WU / TT / LC / Other |
|
|
Product Image
|
|
|
Related Products
|
|
|
|
|
|
|
|
